E 63 AMG Sedan (211.077) V8-6.3L (156.983) (2007)
/v8-6.3l_(156.983)/Page-3576001.png)
Front Bumper: Procedures
AZ88.00-P-0001-02PA Converting Front Bumper
- as of 1.6.06
Do not damage paint.
1. Clean bores for center air inlet grate mounting clips.
Remove paint residues present with dia.7.2 mm bit or awl
2. Insert mounting clips (2) for center air inlet grate into cleaned holes (6 each).
The openings of the mounting clips (2) should point in the direction of travel.
3. Install left and right chrome trim strips (4) into front bumper paneling (1).
Check arrest of chrome trim strips (4) on inside; if necessary, press in again (see arrow).
