mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AR83.10-P-2001T Remove/Install Actuator For Fresh and Recirculated Air Flaps|Page 13711 > < AR83.10-P-2001T Remove/Install Actuator For Fresh and Recirculated Air Flaps|Page 13709
Page 2
background image

6

Synchronize the stepper motors.

AR83.10-P-2002TA Remove/Install Actuator For Left Vent Flap

AR83.10-P-2002TA Remove/Install Actuator For Left Vent Flap

- For left rear
- with CODE (581b) Convenience automatic air conditioning

1

Remove evaporator housing

2

Unscrew screws (2)

3

Remove left rear blending air flap actuator motor (M16/30)

NOTE:  Installation:  Check condition of adjusting mechanism. If damaged, remove the corresponding part from the kinematics parts kit.

4

Disconnect electrical connector (1).

5

Install in the reverse order

6

Synchronize the stepper motors.

AR83.10-P-2003T Remove/Install Actuator For Right Blend Air Flap

AR83.10-P-2003T Remove/Install Actuator For Right Blend Air Flap

AR83.10-P-2001T Remove/Install Actuator For Fresh and Recirculated Air Flaps|Page 13711 > < AR83.10-P-2001T Remove/Install Actuator For Fresh and Recirculated Air Flaps|Page 13709