E 63 AMG Sedan (211.077) V8-6.3L (156.983) (2007)
Special Tools
The measuring set is designed in such a way, that the measuring bolts, according to the measuring points at the vehicle, can be screwed together out of
mounting bolts, extensions and measuring tips/bolts.
The configuration of the measuring bolts is shown in the table, where the digits in the column headed "Measuring bolt configuration" are the special
tool end numbers.
For example: 02/07/10=
168 589 07 63 02 (support stud)
168 589 07 63 07 (extension)
168 589 07 63 10 (measuring tip)
Component Identification
1
Measure comparative measurement (H2) from check point (K) to centering point of the Torx bolt head of the front mount of the rear axle carrier,
left to right.