E 63 AMG Sedan (211.077) V8-6.3L (156.983) (2007)
Component Identification
1
Clean contact surfaces (arrows) at rear axle housing to remove paint and/or gasket residuals and remove uneven material using a suitable tool.
Shown: model 211 with 187 mm dia. rear axle center assembly
Component Identification
2
Position rear axle center assembly adapter (020h) on rear axle housing (magnetic).
3
Align rear axle center assembly adapter (020h) in horizontal transverse direction using spirit level (020i).
4
Tighten retaining bolts (020k) for rear axle center assembly adapter (020h).
Shown: model 211 with 187 mm dia. rear axle center assembly
Component Identification
5
Mount sensor mount (020c) with the two knurled bolts centrally on the sensor (020a).
Component Identification
6
Position sensor bracket (020c) with sensor (020a) on rear axle center assembly adapter (020h) by turning slightly to left/right (magnetic).
The spiral cable (020b) of the sensor (020a) must point in the direction of travel for each measurement. Otherwise the measurement will be
inaccurate.
Shown: model 211 with 187 mm dia. rear axle center assembly