E 63 AMG Sedan (212.077) V8-6.3L (156.985) (2010)
-
"Logic7" (with code (810) Sound system)
"Fix frequency" (for FM radio reception) enables a set station be held. Another alternative frequency is not switched to in the event of poor reception.
"DISC" basic function
The "DISC" basic function can be called by pressing the "DISC" function key. The corresponding basic mask appears. The following information
appears on the audio/COMAND display (readable data carrier inserted):
-
Number of tracks on CD or DVD
-
Current track with elapsed play time
-
Artist (if present on CD or DVD)
-
Function bar with corresponding submenus
In the function bar, the following submenus can be called and various settings made:
-
Submenu "CD/DVD-A or MP3"
-
"Normal track order"
-
"Track mix"
-
"Folder mix" (only MP3 mode)
-
"TA"
-
"AUX" (without code (518) Media interface)
-
Submenu "DVD-A"
-
"Playback pause"
-
"Stop playback"
-
"Restart or continue playback"
-
"Track list or folder" submenu
-
"Display track list" (CD/DVD audio mode only)
-
"Folder selection" (MP3 mode only)
With the audio source AUX, the selection "Standard" or "Boost" is possible under "Volume". The input level can be increased by selecting "Boost".
-
"Medium, Media or changer" submenu
-
"Medium" (with code (525) MB Audio 50 APS radio)
-
"Media" (with code (511) Audio 50 APS with DVD changer and code (518) Media interface)
-
"Changer" (with code (511) Audio 50 APS with DVD changer)
-
"Tone" submenu
-
"Treble"
-
"Bass"
-
"Balance/fader"
-
"Logic7" (with code (810) Sound system)
A track in the track list can be selected with the control buttons on the radio with auto pilot system or on the audio/COMAND control panel. The
playback position can be changed by pushing and holding the audio/COMAND controller to the right (forward) or left (back).
The following audio sources can be connected via the media interface adapter cable (with code (518) Media interface):
-
"iPod"
-
Universal Serial Bus (USB) devices
-
Audio/video devices
-
AUX devices
With the audio source AUX, the selection "Standard" or "Boost" is possible under "Volume". The input level can be increased by selecting "Boost".
"NAVI" basic function
The "NAVI" basic function can be called by pressing the "NAVI" function key. The corresponding basic mask appears. The following information
appears on the audio/COMAND display:
-
Current location
-
Function bar with corresponding submenus
In the function bar, the following submenus can be called and various settings made:
-
Submenu "Navi"
-
"Mode"
-
"Shortest route"
-
"Dynamic route"