mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Procedures|Page 8889 > < Procedures|Page 8887
Page 5
background image

Vehicles with code (230) Exclusive parking assist

17. Insert front short range radar sensor units (A86/1) on right and left into reinforcement mounts (22) and secure with two fastening brackets (9) each.

18. Connect front short range radar sensor units (A86/1) on right and left to wiring harness.

Vehicles with code (U60) Pedestrian protection

19. Install one insert clip fastener (11) on right and left on right and left upper basic carrier (2, 3).

20. Install left front bumper pedestrian protection sensor (B151/1) and right front bumper pedestrian protection sensor (B151/3) on right and left with

one bolt M5x20 (12) each and connect to wiring harness.

Shown on front paneling on model 207.

21. Install reinforcements (31) on right and left on front paneling (1) and fasten with one blind rivet (7) each.

Arrest reinforcements (31) on front paneling (1) twice (see arrows).

Procedures|Page 8889 > < Procedures|Page 8887