mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Campaign - Replace Underbody Panel Fasteners|Page 9118 > < Body - Underfloor Paneling Is Loose Or Sags|Page 9112
Page 1
background image

Underbody Cover: Recalls
Campaign - Replace Underbody Panel Fasteners

FILE: 
SERVICE: GROUP 00 OF SERVICE INFORMATION BINDER
PARTS: GROUP I OF INFORMATION _ PARTS & ACCESSORIES BINDER

Campaign No. 2010030007, April 2010

TO: ALL MERCEDES-BENZ CENTERS

SUBJECT: Model 212, Model Year 2010

Replace Left and Right Underbody Panel Fasteners

Revision

Date

Purpose

A

04/21/10

Revision to warranty information

-

04/09/10

Initial issue

This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz vehicles, has determined that the left and
right underbody panel fasteners do not meet the current production configuration and the underbody panels may be loose or sags. Dealers will replace the
left and right underbody panel fasteners at the next workshop visit.

Prior to performing this Service Campaign:

^ Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.

^ Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described.

Please note that Recall and Service Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.

Approximately 24,100 vehicles are affected.

Procedure

Campaign - Replace Underbody Panel Fasteners|Page 9118 > < Body - Underfloor Paneling Is Loose Or Sags|Page 9112