E 63 AMG Sedan (212.077) V8-6.3L (156.985) (2010)
/v8-6.3l_(156.985)/Page-1691005.png)
Special Tools
Component Identification
Removing
1
Mount hollow piston cylinder (07) using hydraulic hose (023) to hand pump (021).
2
Attach spindle (04), thrust piece hollow piston cylinder (07), counterholder (02) and thrust piece (01) to rear axle carrier (4) and rubber mount
(10).
3
Press out rear rubber mounts (10) from rear axle carrier (4)
When turning the spindle (04) into the thrust piece (01), make sure that the spare tire well is not damaged.
If the hollow piston cylinder (07) has reached its max. stroke, release pressure at the hand pump (021), turn the spindle (04) further into the thrust
piece (01) and repeat the pressing procedure.
