G 500 (463.249) V8-5.0L (113.962) (2003)
11. Clip
Remove/Install
1. Remove inside door opener (4) from front door
2. Unscrew lock button
Only on model 463.246/249/271
3. Remove stop plugs (2) and unscrew screws (7) from door handle (3)
4. Press door lining (1) off of inner door panel in area of clips (11)
Check clips (11) for damage,replace if necessary. Otherwise the door lining (1) extends from the door.
5. Disconnect electrical connectors (10).
On driver power window switch group (S21/1) and left front seat adjustment switch group with memory (S91).
6. Remove door lining (1)
7. Check door foil on inner door panel
Replace damaged foil. When replacing foil, cut out mounting area and glue to overlap or seal with adhesive tape. Otherwise moisture can penetrate
into the passenger compartment.
8. Install in the reverse order
References, Special tools