mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Recall- Headlamp/Turn Signal Brush Guard Replacement|Page 7685 > < Recall- Headlamp/Turn Signal Brush Guard Replacement|Page 7683
Page 3
background image

3. Replace headlamp trim (A, Figure 2):

^ Remove headlamp trim (A) with head lamp grill (arrow); refer to WIS: AR88.00-P-2100G.

Note (Regarding above WIS instructions):

^

If equipped with brush guard, lower brush guard to access headlamp trim (refer to Practical Hints chapter in Operator's Manual).

^

For models with headlamp washers:

^

Transfer washer nozzles from old headlamp trim (A) to new headlamp trim (A).

^

Be careful not to scratch paint when removing and installing headlamp trim (A).

^ Install new trim (A) (without grill mounting holes) painted in same color as vehicle.

Note:

^ All parts removed in this step must be returned to the QEC.

^ Cost of parts removed in this step must be reimbursed to customer. Refer to parts reimbursement table on page.

^ Cost of aftermarket (non Mercedes-Benz genuine) parts removed in this step must not be reimbursed to customer.

4. Replace front turn signal lenses (B, Figure 3):

^ Open directional grill (A).

^ Remove 2 screws (arrows) then remove lens (B).

^ Install new lens (B) in reverse order.

Recall- Headlamp/Turn Signal Brush Guard Replacement|Page 7685 > < Recall- Headlamp/Turn Signal Brush Guard Replacement|Page 7683