G 500 (463.249) V8-5.0L (113.962) (2003)
9. Repeat this process at the wires for connector 3 except cut these wires 50mm from end of connector and cut new wires 80mm in length stripping
15mm of insulation off of both (Figure 5).
10. Plug connector 3 back into Door Control Module (DCM).
11. Secure harness with loom ties.
12. Reinstall door panel per WIS Document AR72.10-P-1000GN.
13. Verify correct operation of all seat functions.
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
March 24, 2009. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.
In Case of Warranty, use the table above.