G 550 (463.236) V8-5.5L (273.963) (2009)
2. Remove headlamp grill (B, Figure 1):
^ Remove bolt (A) and two screws (arrows) then remove headlamp grill (B) from front brush guard (C). Repeat this step on opposite side.
^ Clean area of brush guard where headlamp grills (B) were installed.
Note:
^ Brush guards must not be installed again
^ All parts removed in this step must be returned to the QEC.
^ Cost of parts removed in this step must be reimbursed to customer. Refer to parts reimbursement table above.
^ Cost of aftermarket (non Mercedes-Benz genuine) parts removed in this step must not be reimbursed to customer.