GL 320 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2009)
/v6-3.0l_dsl_turbo_(642.820)/Page-2591003.png)
3
-
MP3-CD or DVD
Receiving signals
^
Direct lines
^
Controller Area Network (data bus/CAN bus) (CAN)
Direct lines
-
Circuit 30g and circuit 31 power supply
-
3 connection groups for audio or video sources (one at the front side and 2 at the rear side)
-
Y/C connection (Y/C line) for analog picture signals from TV combination tuner (analog/digital) (A90/1), with code (863) Digital/analog TV
tuner
-
Low frequency (LF) line (stereo line) for analog audio signals from TV combination tuner (analog/digital), with code (863) Digital/analog TV
tuner
-
Analog video and audio signals from audio/video sources connected to AUX jack
-
Digital picture and audio signals from the audio CD or DVD, video DVD, MP3-CD or DVD inserted in the DVD drive
-
Y/C connection (Y/C line) for analog picture signals from COMAND operating, display and controller unit, with code (528) COMAND with
DVD changer or with code (512) COMAND APS with DVD changer
-
LF (stereo line) for analog audio signals from COMAND operating, display and controller unit, with code (528) COMAND with DVD changer or
with code (512) COMAND APS with DVD changer
CAN
The DVD player is a subscriber to the interior CAN and telematics CAN. The DVD player communicates with the EZS control unit (N73) via the
interior CAN.
The DVD player communicates with the following components via the telematics CAN:
-
Left rear display (A40/5)
-
Right rear display (A40/6)
Decoding of signals
Decoding of analog or digital audio and picture signals from audio/ video units or sources connected via the following options into analog audio and
picture signals:
-
AUX (analog):
-
e. g. portable DVD players, video cameras, MP3 players, or game consoles
-
COMAND video or COMAND audio (COMAND operating, display and controller unit), with code (528) COMAND with DVD changer or with
code (512) COMAND APS with DVD changer
-
Integrated DVD drive (digital):
-
Audio CD or DVD
-
Video DVD
-
MP3-CD or DVD
Transmitting signals
^
Direct lines
^
CAN
Direct lines
-
Y/C connection (Y/C line) for analog picture signals to left rear display or right rear display
-
LF (stereo line) for analog audio signals to left rear display or right rear display
-
LF (stereo line) for audio out (analog) to COMAND operating, display and controller unit, with code (528) COMAND with DVD changer or with
code (512) COMAND APS with DVD changer
CAN
The DVD player is a subscriber to the interior CAN and telematics CAN. The DVD player communicates with the EZS control unit via the interior
CAN. The DVD player communicates with the following components via the telematics CAN:
-
Left rear display
-
Right rear display
Design
