GL 320 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2009)
- Rectify faults in the electric seat adjustment
a) Lock not engaged in loading floor position (folded down)
- Check whether there are any objects under the seat
- Check whether the backrest can be locked by pressing it into the loading floor position
- If "no", continue with step 3b)
- If "yes", loosen seat and bolt back down again in order to eliminate stresses
- If the complaint is not rectified, replace cushion frame
b) Lock not engaged in driving position (folded up)
- Remove load compartment cover (roller blind) and check upper backrest lock
- If the warning lamp does not go out, there is a fault in the locking system, so replace the locking unit (see AR 91.12-P-1110 gy)
- If the warning lamp goes out, there are stresses in the seat, so loosen seat and bolt back down again in order to eliminate stresses
- If the complaint is not rectified, replace backrest frame. (Backrest frame is not available as an individual spare part. You must order the complete
backrest assembly.)
Attachments
Symptoms
Parts