GL 320 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2009)
/v6-3.0l_dsl_turbo_(642.820)/Page-2708010.png)
3
Connect black 2-pin connector (20) of left wiring harness for LED lamps (5) with black 2-pin coupling (26) of power supply wiring harness (6).
The installation location of the two black 2-pin couplings (26) for the power supply wiring harness (6) is defined by the different line lengths.
4
Route blue/white line (bl/ws) from installation location of left trunk lamp (E18/5) to black 2-pin coupling (26) and attach using cable ties to
vehicle wiring harness.
5
Lift cover for spare wheel well (30) and route power supply wiring harness (6) under the carrier (25).
6
Connect blue/white line (bl/ws) with a potential distributor (31) to the pink/white line (rs/ws) of the left trunk lamp (E18/5).
The potential distributor (31) can be found in the wiring harness repair kit.
7
Install left trunk lamp (E18/5).
