GL 320 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2009)
/v6-3.0l_dsl_turbo_(642.820)/Page-2828023.png)
13. Screw on crossmember on left rear center section finger tight using microencapsulated bolts M10 x 30 (9) with shims 10.5 x 20 x 2 and nuts M10.
14. Screw on crossmember on right rear center section finger tight using microencapsulated bolts M10 x 30 (9) with shims 10.5 x 20 x 2 and nuts
M10.
15. Align trailer hitch.
It is essential to observe the following tightening sequence.
16. Screw on crossmember on left rear center section finger tight, to torque value, using microencapsulated bolts M10 x 30 (9) with shims 10.5 x 20 x
