mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Technician Safety Information|Page 14172 > < Paint - Clearcoat With Higher Scratch Resistance|Page 14169
Page 1
background image

Paint: Technician Safety Information

AS98.00-Z-0002-01A Risk of Explosion Caused By Paint Vapors Igniting. Risk of Poisoning Caused
By Inhaling Paint Vapors

AS98.00-Z-0002-01A Risk Of Explosion Caused By Paint Vapors Igniting. Risk Of Poisoning Caused By Inhaling Paint Vapors.

DANGER:  No smoking. No open flames. Use respiratory protection, protective clothing, gloves, safety goggles and skin cream. Ensure that the
area is well ventilated.

Potential risks

Risk of explosion

caused by the ignition of vapors when working with paints.

Risk of poisoning

Inhaling paint vapors and spray mist can pose a health hazard! Contact with paint vapors can cause irritation to skin and eyes.

Paint contains hazardous substances such as:

^

Cancer causing substances (e.g. benzene, zinc chromate)

^

Poisonous substances (e.g. zinc chromate, phenol),

^

Genetically hazardous substances (e.g. ethyl glycol acetate/ethyl acetate)

Rules of conduct and safety precautions

-

No smoking. No open flames.

-

Always use protective clothing, gloves, safety goggles and skin cream.

-

Paint in a spray booth. Ensure adequate ventilation and always wear a protective respiratory mask.

-

Paints require special identification. Poisonous and cancer causing substances (marked with a T, skull and crossbones) may only be handled by
specially qualified personnel.

-

When handling these materials, please observe the safety guidelines (UVV-VBG 23), the Ordinance on Hazardous Substances and the
Environmental Protection Regulations (according to the hazardous substance ID on the container and the safety data information sheets from the
supplier).

-

In export countries, please observe your country-specific accident prevention and protection regulations.

First aid measures

Eyes

^

Rinse eye thoroughly for several minutes with lukewarm water while protecting the non-affected eye. Eyelid must be wide open. Request victim to
move the eye in all directions as it is being rinsed out. Consult a physician (eye doctor) and be sure to state measures already taken.

Respiratory paths

^

Fresh air; perform artificial respiration if victim is no longer breathing, if necessary administer oxygen, keep warm, keep calm. Contact physician.

Skin

^

Paint splashed onto skin must be immediately and carefully washed off with plenty of soap and water. If necessary, clean skin again with a suitable
skin cleaning agent.

AS98.00-Z-0003-01A Risk of Injury Caused By Caustic Burns Due to Contact With Metal Dust
Remover

AS98.00-Z-0003-01A Risk Of Injury Caused By Caustic Burns Due To Contact With Metal Dust Remover.

DANGER:  Avoid contact. Wear tight-fitting safety glasses and acid-resistant gloves.

Risk of injury

Metal dust remover contains oxal and phosphoric acids. Contact or swallowing can result in acid burns.

Safety instructions/precautions

^

Wear acid-resistant protective clothing (apron, protective gloves) as well as safety glasses. Observe safety regulations.

^

Wear tight-fitting safety glasses, acid-resistant gloves and protective clothing.

Technician Safety Information|Page 14172 > < Paint - Clearcoat With Higher Scratch Resistance|Page 14169