GL 320 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2009)
/v6-3.0l_dsl_turbo_(642.820)/Page-758003.png)
12. Install the crankshaft bearing cap of the 1st crankshaft main bearing.
13. Replace crankshaft radial sealing ring.
14. Reassemble the removed components in the reverse order.
15. Check oil level in automatic transmission.
16. Carry out a quick test after repair.
17. Clean engine.
The tightening torques are given in the applicable repair instructions.
Attachments
Symptoms
Parts
Attachments
Work units
