mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

ABOUT US
AH01.30-P-1000-06PI Information For Assigning the Cylinder Head Gaskets|Page 4426 > < Crankshaft Main Bearing Seal|Service and Repair|Page 4421

GL 320 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2009)

Page 1
background image

Cylinder Head Gasket: Service and Repair
AH01.30-P-1000-06PI Information For Assigning the Cylinder Head Gaskets

AH01.30-P-1000-06PI Information for assigning the cylinder head gaskets

Component Identification

Assignment of the valid cylinder head gasket to the corresponding engine is, also on mounted cylinder heads, to be seen on the right cylinder head
gasket (2). The cylinder head gasket (2) with open bore (1) is to be used for vehicles with a vacuum pump. The cylinder head gasket (2) with closed
bore (1) is to be used for vehicles without a vacuum pump.

AH01.30-P-1000-06PI Information For Assigning the Cylinder Head Gaskets|Page 4426 > < Crankshaft Main Bearing Seal|Service and Repair|Page 4421