GL 320 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2009)
/v6-3.0l_dsl_turbo_(642.820)/Page-1253003.png)
3
Filling the pump from a large container
7.1
Insert nozzle (6) for electrical pump unit in the AdBlue(R) filler neck (2) right up to the stop ring (7).
8.1
Fill AdBlue(R) tank.
The nozzle (6) switches off automatically when the AdBlue(R) tank is full.
9.1
Remove nozzle (6) from AdBlue(R) filler neck (2).
Component Identification
Hose filling from the small container
7.2
Mount fitting (01), close valve (02) and screw connector (03) onto AdBlue(R) filler neck (2) as well as connector (04) into container (05)
finger-tight.
8.2
Fill the AdBlue(R) tank by lifting the container (05) and opening the valve (02).
Repeat process if necessary with further containers (05).
No further AdBlue(R) will flow when the AdBlue(R) tank is full.
9.2
Close valve (02) and detach connections (03, 04).
Component Identification
Filling bottles
7.3
Remove cap and screw AdBlue(R) bottle (8) finger-tight onto the AdBlue(R) filler neck (2).
8.3
Fill AdBlue(R) tank by pressing AdBlue(R) bottle (8) downwards.
Repeat process if necessary with further AdBlue(R) bottles (8).
No further AdBlue(R) will flow when the AdBlue(R) tank is full.
9.3
Unscrew AdBlue(R) bottle (8) from AdBlue(R) filler neck (2) and dispose of it.
10
Remove foil (3) and paper (4).
Do not allow any paper (4) to find its way into the AdBlue(R) tank otherwise there is risk of damage to the AdBlue(R) delivery module (A103/2).
