GL 320 CDI (164.822) V6-3.0L DSL Turbo (642.940) (2008)
1. Route the wiring harness (5) of the trailer hitch (2) and guide into the interior.
2. Fasten rubber grommet (6).
Dispose of ex-factory rubber grommet (6).
3. Fasten wiring harness (5) using cable tie (7) to trailer hitch (2).
4. Fasten wiring harness (5) using cable tie (8) in interior.
5. Insert fuse carrier (9) into load compartment fuse and relay box (F4) and fasten ground cable (10) in place.
The fuses are color-coded.
6. Insert relay (11).
If not present.
Only for vehicles from 12.06
7. Insert relay (12).
If not present.
AN31.19-P-8080-06GZ Retrofit Trailer Brake Cable Set
AN31.19-P-8080-06GZ Retrofit Trailer Brake Cable Set
- as of 1.12.06
- with CODE (494) USA version
1. Insert interior compartment/trailer hitch separation point connector (X58/33) of trailer brake wiring harness (1) into trailer hitch connector (2).