GL 320 CDI (164.822) V6-3.0L DSL Turbo (642.940) (2008)
Component Identification
1
Disconnect black plug C (20) from rear SAM control unit (N10/8).
2
Remove contact carrier (21) for pins 1 to 26 out of black plug C (20).
3
Unpin line from contact cavity 1 of contact carrier (21) and pin into contact cavity 2 of included black, 2-pin connector housing (22).
Line in contact cavity 1 is the "Front passenger door contact" signal.
4
Unpin line from contact cavity 14 of contact carrier (21), pin into contact cavity 1 of included black, 2-pin connector housing (22) and lock
connector housing (22).
Line in contact cavity 14 is the "Driver door contact" signal.
5
Pin white/blue line (ws/bl) of illuminated door sill molding wiring harness (2) into contact cavity 14 of contact carrier (21).