GL 320 CDI (164.822) V6-3.0L DSL Turbo (642.940) (2008)
8
Slide end cover (2) with crankshaft radial sealing ring (1) carefully on contact surface (3a) of crankshaft flange (3).
While doing this, check the correct installation position of the lip (1d).
A wrong installation position leads to leakage.
The lip (1d) must point towards the crankcase (4) all around its circumference.
9
Detach insertion tool (271) from crankshaft flange (3).
10
Check the correct installation position of the protective lip (1s).
An incorrect installation position leads to premature wear of crankshaft radial sealing ring (1).
The protective lip (1s) must point towards the transmission housing around its entire circumference.
11
Tighten bolts (2a) gradually diagonally.