GL 320 CDI (164.822) V6-3.0L DSL Turbo (642.940) (2008)
Component Identification
1
Measure distance dimension (V1) from check point (K) to center of Torx bolt head of rear mount of front axle carrier. Measure on the left and
right side in each case.
If necessary, unscrew and screw in Torx bolts and check for deformation.
Shows model 164.1
Component Identification
2
Measure distance dimension (V2) from check point (K) to center of Torx bolt head of front mount of front axle carrier. Measure on the left and
right side in each case.
If necessary, unscrew and screw in Torx bolts and check for deformation.
Shows model 164.1
Component Identification
3
Measure distance dimension (V3) diagonally to the centering point of the Torx bolt heads between the front and rear bearing of the front axle
carrier. Measure on the left and right side in each case.
Shows model 164.1