GL 550 (164.886) V8-5.5L (273.963) (2008)
^
Temperature and electromagnetic compatibility (EMC) properties have been optimized
Playing audio CDs
Audio CDs can be played using the single-slot CD drive, located behind the moving color display of the COMAND operating, display and controller unit
and using a CD changer (Code (819) 6-disk CD changer). The CD changer (Code (819) 6-disk CD changer) is connected via MOST to the COMAND
operating, display and controller unit.
Audio signal control
The COMAND operating, display and controller unit manages the audio sources, such as CD changer (Code (819) 6-disk CD changer). The audio
sources can be controlled via MOST. An external analog audio source can be connected to the COMAND operating, display and controller unit via the
AUX jack in the glove box. Data exchange via a discrete line.
Audio output in rear with code (519) Rear audio system
It is possible to output audio signals in the rear using headphone connections on the HBF control unit. For this purpose, the audio signals are transferred
by the COMAND, operating, display and controller unit to the rear audio control unit over direct wiring. There, the signals are amplified and output
directly to the HBF control unit for output to the headphones.
Making phone calls
The cell phone (A34/6) is inserted into the UPCI [UHI] (Universal Portable CTEL Interface) cell phone holder (A34/15) and is thereby connected to the
Universal Portable CTEL Interface (UPCI [UHI]) control unit. The telephone feature is included in the UPCI (Universal portable CTEL Interface)
control unit. The user can operate the system with the COMAND, operating, display and controller unit. The Universal Portable CTEL Interface (UPCI
[UHI]) control unit is connected to the COMAND operating, display and controller unit via MOST.
Use of DVD drive
The DVD drive of the navigation module on vehicles with code (530) COMAND APS USA (with navigation system) is not suitable for playing video
media (DVD Video, CD video or the like). The drive is only used for reading in the navigation DVD.
Navigation
All MOST components (navigation processor and audio gateway) known from other versions and required for navigation are present in the COMAND,
operating, display and controller unit.
Emergency call
Emergencies call are accomplished using the emergency call system control unit. In the event of an emergency call, the audio outputs and UPCI
(Universal portable CTEL Interface) control unit, are muted.
GF82.85-P-3134GZ COMAND Operating, Display and Controller Unit, Component Description
GF82.85-P-3134GZ COMAND Operating, Display And Controller Unit, Component Description
- with CODE (527) COMAND APS (with navigation)
- except CODE (494) USA version
- except CODE (498) Japan version