GL 550 (164.886) V8-5.5L (273.963) (2008)
/v8-5.5l_(273.963)/Page-2564008.png)
5. Thoroughly paint welding beads (Figure 10) and any metal exposed during grinding (in area of 4 weld points), and welder's ground point inside the
square tube:
^
Apply black paint primer.
^
Paint with black paint.
6. Allow paint to dry then apply preservation agent to painted surfaces in area of welds.
7. Reassemble in reverse order.
8. Perform basic programming, refer to WIS: AR00.19-P-0200GZ.
