GL 550 (164.886) V8-5.5L (273.963) (2008)
Location
The center outlet temperature sensors are installed as shown in the figure.
Component Identification
Location
The center rear interior temperature sensor is installed as follows in the adjoining picture.
Component Identification
Task
The temperature sensors measure the temperature of the discharged air at the particular air flap and forward them to the comfort AAC [KLA] control and
operating unit (N22/7).
The comfort AAC control and operating unit compares the measured temperature value of the discharged air to the setting on the temperature selector
wheel. The blending air flap is readjusted, depending on the result. In addition, this also measures the recirculated interior temperature.