GL 550 (164.886) V8-5.5L (273.963) (2008)
Component Identification
1
Insert the retaining tube (08) in the suspension (07).
Component Identification
2
Insert suspension (07) and using vernier caliper (02) adjust 26 mm between left mount (07r) and threaded bolt (07n).
3
Align suspension (07) with right mount (07s) horizontal and adjust dimensions at the mounts (07r, 07s), see Table.
The suspension (07) enables the vehicle center to be displayed with the check point (K).
AR40.30-P-0402-01GZ Carrying Out Distance and Comparison Measurements on Front Axle
AR40.30-P-0402-01GZ Carrying out distance and comparison measurements on front axle
Test Values For Distance And Comparison Measurement On Front Axle