Component Information – Timing Chain Service and Repair Procedures - 2010 GLK 350 4MATIC Engine
/v6-3.5l_(272.971)/Page-537005.png)
Component Identification
13
Place the rivet press tool (01) in the center of a riveted link (1) pin.
Rivet the pins of the riveted link (1) individually.
14
Tighten the pressure screw (02) at the rivet press tool (01).
Tightening torque of the 01 pressure screw (02): reference value 32 Nm.
15
Remove rivet press tool (01).
Component Identification
16
Inspect riveting (arrows), re-rivet if necessary.
AR05.10-P-7601-04VA Drawing In Timing Chain
AR05.10-P-7601-04VA Drawing in timing chain
Special Tools
