GLK 350 4MATIC (204.987) V6-3.5L (272.971) (2010)
Component Identification
4
To adjust camber and caster, replace the respective standard bolt (19a) on the torque strut (18) or cross strut (17) with a repair bolt (19c).
A Standard threaded connection
B Repair threaded connection
Component Identification
The standard bolt (19a) is centered by the bumps (arrows) in the bearing of the torque strut (18) or cross strut (17). Grooves in the repair bolt (19c)
permit it to be installed into the rubber mount on either the right or left side, allowing the torque strut (18) or cross strut (17) to be adjusted by a
distance of 4 mm to the inside or outside.
The repair bolt (19c) must not be rotated after being fixed into place in the rubber mount of the strut rod (18) or the cross strut (17). Do not tighten
the nut (19b) yet so that the rubber mount of the strut rod (18) or cross strut (17) can twist when the vehicle is rocked to settle the suspension.
AR40.20-P-0322-03CZ Check Caster and Assign to Tabular Value
AR40.20-P-0322-03CZ Check caster and assign to tabular value
Check and adjustment values for caster