ML 320 (163.154) V6-3.2L (112.942) (1998)
Central Control Module: Service and Repair
AR54.21-P-1200GH Remove/Install Extended-Activity-Module (EAM)
Remove/Install Extended-Activity-Module (EAM)
Remove/Install
1.1 Read out coding of Extended-Activity-Module (EAM)
NOTE: Only when replacing the EAM and if it can still be read out using STAR DIAGNOSIS.
2
Remove cover under the instrument panel (left)
3
Loosen the lock (1) which secures the EAM in the bracket
4
Remove the Extended-Activity-Module (EAM) (2) downwards out of the bracket
5
Disconnect connectors
6
Remove drive authorization module
7
Install in the reverse order
8.1 Code the EAM
NOTE: Only when installing a new EAM.
9
Turn ignition key into position 1 and wait for 40 seconds before first starting the engine.