mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Removal and Replacement|Page 11756 > < Removal and Replacement
Page 2
background image

6

Remove housing (1)

NOTE:
-

Set selector lever to position N

-

Installation: As of 01.09.01, ensure that air duct is installed tightly.

7

Install in the reverse order

AR68.20-P-2020GI Remove/Install Rear Center Console

AR68.20-P-2020GI Remove/Install Rear Center Console

- Models 163.154/174 #A as of 289565
- Models 163.157/175 (all)

Remove/Install

1

Remove armrest lid (1)

2

Remove stowage box in the center console

NOTE:  Press the center pin approx. 4 mm downwards, then remove the rivet upwards

3

Remove screws (2) on the cup holder

4

Remove inner part of ashtray

5

Remove ashtray trim (3)

CAUTION:  Risk of breaking the clips (4)

NOTE:  Loosen clips (4) and pull back the lower edge of the cover and remove upwards

6

Remove screws (5)

7

Unclip rear center console (6) above (arrows)
-

Long wedge: See Special Tools below.

8

Remove rear center console (6) from the center console

9

Disconnect plug from control module of rear control panel and ashtray

NOTE:  Disconnect plug of the rear ashtray from ashtray housing

10

Install in the reverse order

Removal and Replacement|Page 11756 > < Removal and Replacement