ML 320 (163.154) V6-3.2L (112.942) (1998)
Power Seat Switch: Service and Repair
AR91.29-P-0003GH Remove/Install Seat Adjustment Switch
Remove/Install Seat Adjustment Switch Unit On Front Seat
- Models 163.154 #A up to 051499 with CODE (221b) Electric Adjustable Seats
Remove/Install
1
Unscrew screws (3) from the front paneling (2)
2
Pull down the front paneling (2) approx. 1 cm and remove forwards
NOTE: Remove electrical line out of the clips on the front paneling (2).
3
Disconnect left front seat adjustment switch connector (S22x1) or right front seat adjustment switch connector (S23x1) on front seat frame
4
Raise operating buttons (7) with long wedge from left front seat adjustment switch (S22) or right front seat adjustment switch (S23)
-
Installation wedge: See Special Tools below.
5
Unscrew screws (5) from outer paneling (4)
6
Remove outer paneling (4)
7.1 Disconnect seat adjustment connector (X54/1)
NOTE: Not fitted with memory switch for left electrically adjustable front seat, code 241 or memory switch for right electrically adjustable front
seat, code 242a.
8
Unscrew screws (6) from left front seat adjustment switch (S22) or right front seat adjustment switch (S23)
9
Remove left front seat adjustment switch (S22) or right front seat adjustment switch (S23)
10
Install in the reverse order
Special Tools