ML 320 (163.154) V6-3.2L (112.942) (1998)
Blower Motor: Service and Repair
AR83.30-P-5565GH Remove/Install Rear Blower Motor
Remove/Install Blower Motor In Rear
Model 163.113/154/172 #A up to 289565,
Model 163.113 #X up to 754620,
Model 163.128/157/175
1
Remove center console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Overhaul
2
Disconnect rear blower motor connector (1, 2)
3
Remove screws (3)
4
Pull out rear blower motor (M2/1) to the rear
NOTE: Installation: Ensure that the rear blower motor (M2/1) is connected to the air duct correctly (4).
5
Install in the reverse order.