ML 320 (163.154) V6-3.2L (112.942) (1998)
3
Disconnect connectors and hoses from pumps (5)
NOTE: Loosen wiring harness from the side of the washer fluid reservoir. If fitted, disconnect plug from washer fluid level indicator switch.
4
Unscrew bolt (2)
5
Loosen air conditioning hose (3) from clip (4)
6.1 Remove covers and locking clips from fuse and relay module
NOTE: Only Model 163.128.
7
Detach cooling module (10) from lower grommets
8
Remove washer fluid reservoir (1)
NOTE:
-
Loosen washer fluid reservoir (1) from lower grommets (6). Lift up cooling module with the help of an assistant. Press washer fluid reservoir
inwards and pull straight upwards.
-
Installation: Ensure that the washer fluid reservoir (1) is correctly seated in the grommets (6) and side clip.
9
Install in the reverse order
Special Tools
Hand Pump P/N # 210 589 00 71 00