ML 350 (163.157) V6-3.7L (112.970) (2004)
Selecting the country
(N41) There is the choice of the following national versions available in the trip computer control unit:
-
Germany
-
England
-
Spain
-
France
-
USA
To select a country:
-
Press the mode button, button on the right, (N41s2) sufficiently often until one of the national abbreviations GEr, GB, ESP, Fr or USA appears in
the display.
-
Press the reset button, button on the left, (N41s1) sufficiently often until the national abbreviation of the desired country appears (cf table below).
-
Press the mode button, button on the right, (N41s2) in order to exit the adjustment.
Units
The country-specific units are also set when the country is selected. A distinction is made between UK and US gallons.
Compass (route)
The route is displayed using the first letter of the points of the compass. The directions are displayed in the language of the particular country.
GF54.50-P-4100-01GH Trip Computer Control Module, Task
GF54.50-P-4100-01GH Trip Computer Control Module, Task
-
with CODE (245) Trip computer
The trip compute control module (TRIP, N41) has the following tasks:
-
Display and calculate the current and average fuel consumption
-
Display and calculate the likely range
-
Display the trip time
-
Display the date
-
as of 1.9.00: Display the route (compass)
On vehicles with ATA also to:
-
Display the status of the ATA sensory system (on/OFF)
-
Output a "life sign" on the alarm bus to the all activity module (AAM, N10)
-
Output an alarm signal on the alarm bus to the all activity module (AAM, N10) when the glass breakage sensor (N41b2) is triggered
-
Output an alarm signal on the alarm bus to the all activity module (AAM, N10) when the inclination sensor (N41b2) is triggered
GF54.50-P-4100-02GH Trip Computer Control Module, Design
GF54.50-P-4100-02GH Trip Computer Control Module, Design
-
with CODE (245) Trip computer