ML 350 (163.157) V6-3.7L (112.970) (2004)
Note:
Replacement of the lift gate is permissible if there is deterioration of the sheet metal of more than 1.5 mm or rust through damage over a length
of 3cm in the area of the handle cutout (Figure 4)
Workshop Equipment
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
August 18, 2008. Please refer to Netstar --> Star Teklnfo --> Star Time for the most current labor time allowance.
In case of Warranty, use the table.