mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Campaign - Brake/Fuel Line Spacer Installation|Page 6885 > < Brake Fluid Pressure Sensor/Switch|Locations|Page 6876
Page 1
background image

Technical Service Bulletin # 2009100002A

Date: 100310

Campaign - Brake/Fuel Line Spacer Installation

FILE: 
SERVICE: GROUP 00 OF SERVICE INFORMATION BINDER
PARTS: GROUP I OF INFORMATION _ PARTS & ACCESSORIES BINDER

Campaign No. 2009100002, March 2010

Revision

Date

Purpose

A

03/03/10

Revision to Warranty information

-

01/05/10

Initial issue

TO: ALL MERCEDES-BENZ CENTERS

SUBJECT: Model 163, Model Year 1999 - 2005

Check for Installation of Spacer Between Brake and Fuel Line, Install if Necessary

This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz vehicles has determined that the spacer
between the brake line and fuel line may not have been installed. Dealers will check for the presence of a spacer, and if missing, install the spacer.
Dealers will also check the brake line for chafe marks from the fuel line and replace the brake line if necessary.

Shown in this bulletin is a sample copy of a letter which owners of the affected vehicles will receive.

Prior to performing this Service Campaign:

^ Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.

^ Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described.

Please note that Recall and Service Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.

Approximately 63,704 vehicles are affected.

Equipment

Note:

Use only Mercedes-Benz recommended brake bleeder:

^ To place an order for the Brake Bleeder p/n 275-ST-BBE-4.0 please contact our equipment provider SPX.

Campaign - Brake/Fuel Line Spacer Installation|Page 6885 > < Brake Fluid Pressure Sensor/Switch|Locations|Page 6876