ML 350 (163.157) V6-3.7L (112.970) (2004)
-
Dispose of engine mounts to mixed scrap.
13
Install in the reverse order
14
Read diagnostic trouble code memory and erase
NOTE:
-
Only required if the right engine mount is removed.
-
Stored faults which can result from removed lines or a simulation due to installation or test work, have to be processed and erased in the fault
memories after completing the work.
Bolt of front engine mounts to front axle carrier............................................................................................................................................................35 Nm
Bolt of engine mount to engine support.........................................................................................................................................................................65 Nm