ML 350 (163.157) V6-3.7L (112.970) (2004)
NOTE: Installation: ensure that lines are routed properly.
6
Unplug connector (5) and remove connector at A-pillar
NOTE: Slacken retaining lug on back of connector and push connector towards door.
7
Unplug connector (6).
8
Unscrew nut from ground (right A-pillar) (W29/2) and detach circuit 31 cable (3) from ground.
9
Unscrew plastic nuts (7).
10
Remove fuse and relay module in right front footwell (F2) with wiring harness.
11
Install in the reverse order