mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF00.20-P-0003-05A Active Service System (ASSYST) Influencing Parameters|Page 2147 > < GF00.20-P-0003-05A Active Service System (ASSYST) Influencing Parameters|Page 2145
Page 8
background image

Example 1 :
Sufficient oil was added during the oil change. This means that the starting distance is 15000 km.

After 10000 km oil is topped up under normal driving conditions (a). The bonus (B1) is issued and displayed. What this means is that when the
remaining distance is retrieved, a greater remaining distance is displayed. (Provided the aforementioned conditions for detecting the oil replenishment
are met.)

Oil is topped up again after a further 5000 km (b). In this case also a bonus (B2) is issued and displayed.

If, after this, no further oil is topped up and the car continues to be driven in the same manner, a service interval of about 24000 km is thus achieved.

In this example, the curve moves at all points within the light range of the chart; consequently, all the oil replenishments are displayed by increasing the
remaining distance.

Example 2:
The specified quantity of oil was added when the oil was changed.
The car is driven under very favorable conditions and oil is topped up after 10000 km (a). Internally, the bonus B1 is issued, the service interval is
extended accordingly by enlarging the remaining distance. However, as the curve is sometimes within the shaded area, only the part of B1 which is
within the light area, is at first displayed as an extension of the remaining distance. (Provided the aforementioned conditions for detecting oil
replenishment are met.)

GF00.20-P-0003-05A Active Service System (ASSYST) Influencing Parameters|Page 2147 > < GF00.20-P-0003-05A Active Service System (ASSYST) Influencing Parameters|Page 2145