ML 350 (163.157) V6-3.7L (112.970) (2004)
Refueling Vapor Recovery System: Service and Repair
Remove/install Fuel Vapor Expansion Reservoir
DANGER:
-
Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injuryto eyes and skin from
contact with fuel
-
Fire, sparks, open flames or smoking forbidden
-
Pour fuels only into suitable and appropriately marked containers
-
Wear protective clothing when handling fuel
1
Remove filler cap (1)
NOTE: Installation: Install bolt (2) with locking agent. Adjust the filler cap correctly
2
Position the hinge (3) in the closed position
3
Unscrew bolts (4) on filler neck
4
Remove paneling on the C-pillar
5
Separate vent lines (5) from filler neck (6)
6
Remove bolts (7) from filler neck bracket (8)
7
Remove wiring clip (9) from the body
NOTE: Installation: Route the wiring behind the bracket (8)
8
Remove bolt (10) on fuel vapor expansion reservoir (11)