mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Steering - Fluid Leaks/Noises/Heavy Steering/Looseness|Page 7780 > < Recall - Power Steering Hose Replacement|Page 7774
Page 1
background image

Power Steering Line/Hose: All Technical Service Bulletins
Steering - Fluid Leaks/Noises/Heavy Steering/Looseness

Date: May 22, 2006

Order No.: T-B-46.20/30c

Supersedes: T-B-46.20/30b dated April 21, 2006

Group: 46

Revision History

Revision

Date

Purpose

C

5/22/06

Condition 8 Added/Parts and Warranty Information Updated

b

4/21/06

Condition 2 Remedy and Warranty Information Updated

a

2/9/06

Condition 5 Remedy and Warranty Information Updated

-

9/14/05

Initial issue

SUBJECT: 
Models 163.154/157/172/174/175 

Steering Complaints

If you receive customer reports in the above model vehicles of any of the below power steering system conditions, please perform the associated remedy.

Note:

Do not replace steering gear as a remedy for any of the below conditions.

Condition 1: Steering leaking at steering gear

Cause: Steering gear internal pipes may be oxidized or corroded.

Remedy: Remove steering gear, refer to WIS document AR46.20-P-0600GH. Replace oxidized or corroded steering gear internal pipes, refer to WIS
document AR46.20-P-3501GH.

Condition 2: Steering noisy when turning.

Cause: Steering shaft dust cap and/or clamp for steering gear bellows may be damaged.

Remedy: Remove steering gear, refer to WIS document AR46.20-P-0600GH. Replace steering shaft dust cap if damaged, refer to WIS document
AR46.20-P-0004GH. Replace clamp for steering gear bellows if damaged.

Condition 3: Steering gear leaking at internal pipe fittings.

Cause: Seal at internal pipe fittings may be insufficient.

Remedy: Remove steering gear, refer to WIS document AR46.20-P-0600GH. Remove internal pipes, refer to WIS document AR46.20-P-3501GH.
Replace 0-rings at internal pipe fittings if necessary.

Condition 4 (Valid for 163.174 Only): Steering heavy or stiff during low speed turns.

Cause: Parametric valve may be malfunctioning.

Remedy: Remove steering gear, refer to WIS document AR46.20-P-0600GH. Replace parametric valve (PML), refer to WIS document
AR46.50-P-6000GH.

Condition 5: Excessive play in steering wheel and/or noisy when steering.

Cause: Inner tie rod may be damaged.

Remedy: Replace inner tie rod refer to WIS document AR46.40-P-0201GH.

Steering - Fluid Leaks/Noises/Heavy Steering/Looseness|Page 7780 > < Recall - Power Steering Hose Replacement|Page 7774