ML 350 (163.157) V6-3.7L (112.970) (2004)
and the end of the torsion bar (Figure 1, 2) with Optimol grease before installation. Additionally, ensure that the rubber bellow (Figure 1, 5) is
properly positioned.
7)
Repeat steps 2-6 for other side.
8)
Check and adjust vehicle ride height/level at front and rear axles. Reference WIS document AR40.20-P-0301GH.
9)
Check and correct headlamp adjustment. Reference WIS document AP82.10-P-8260GH.
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair.
In Case of Warranty