ML 430 (163.172) V8-4.3L (113.942) (2000)
Carpet: Service and Repair
AR68.20-P-4810GH Remove/Install Luggage Compartment Floor Covering
AR68.20-P-4810GH Remove/Install Luggage Compartment Floor Covering
Remove/Install
Torx bit set: See Special Tools below.
1
Remove inner spare wheel together with cover
2
Fold third seat row upward
-
Only with 3rd seat row, code 847.
3
Remove load compartment floor flaps
4
Remove seat belt end fitting for third seat row (1)
-
Only with 3rd seat row, code 847.
-
Belt end fitting screw = 35 Nm
5
Unscrew screws for load retainer (2)
-
Bolt securing cargo retainer bracket to loading compartment floor = 24 Nm
6
Remove mount for child seat retainer
NOTE: If installed
-
Bracket for child seat anchorage on load compartment floor = 24 Nm
7
Remove cover for rear edge of load compartment
CAUTION: Do not scratch cover when removing caps.
NOTE: Installation: Property install seal on rear-end door.
8
Remove floor covering (3) to rear
NOTE: Installation: Install floor covering below side paneling.
-
Assembly wedge: See Special Tools below.
9
Install in the reverse order