ML 430 (163.172) V8-4.3L (113.942) (2000)
Glove Compartment: Adjustments
AR68.10-P-1300GH Adjusting Glove Compartment Lid
Adjusting
NOTE: During entire operation pay attention to uniform transition, gap and adjustment possibilities on hinge (arrows) between glove compartment lid
(1) and instrument panel (2).
1
Loosen screws (3) on striker eye (4)
NOTE: Installation: Adjust transition at top of striker eye (4). Glove compartment lid (1) should make slight contact to stop buffers.
2
Remove glove compartment
3
Adjust gap
NOTE: For this purpose loosen hinge screw (5) from hinge (6).
4
Install glove compartment
5
Check for easy motion and proper function