ML 430 (163.172) V8-4.3L (113.942) (2000)
Roof Rack Frame: Service and Repair
Remove/Install Roof Railing
Remove/Install
CAUTION: Avoid damaging paint
1
Unclip caps (1) from roof railing (2)
2
Unscrew screws for roof railing (3) from roof paneling
CAUTION: To facilitate removal heat screw heads with soldering gun, etc. (175 W, 4-5 min).
NOTE: Installation: Install new bolts.
-
Screw for roof railing on roof paneling = 9 Nm
3
Unclip cap (7) from mounting plate (6)
4
Remove screw (4) roof railing to securing plate (6)
-
Bolt, roof railing on mounting plate = 9 Nm
5
Remove roof railing (2)
CAUTION: Check seal below roof railing for damage and replace if necessary.
NOTE: Installation: Coat with sealing compound.
6
Unscrew screw for mounting plate (5) from roof railing
-
Screw for roof railing on roof paneling = 9 Nm
7
Remove mounting plate (6)
CAUTION: Check seal below mounting plate for damage and replace if necessary.
NOTE: Installation: Coat with sealing compound.
8
Install in the reverse order