ML 430 (163.172) V8-4.3L (113.942) (2000)
Brake Caliper: Service and Repair
AR42.10-P-0080GI Remove/Install Rear Axle Brake Caliper
Remove/Install Rear Axle Brake Caliper
Remove/Install
Danger:
-
Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid.
-
Pour brake fluid only Into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling
brake fluid.
-
Risk of accident when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after
repair work.
-
Before commissioning the vehicle, operate the brake pedal several times until the pressure in the brake system is built up and maintained.
1
Remove wheels
2
Disconnect brake hose (51) from brake line (5)
CAUTION: Plug connections with plugs to prevent brake fluid running out.
NOTE: Do not allow brake fluid supply reservoir to run completely empty.
3
Disconnect brake hose (51) from fixed caliper (31b)
4.1 Unplug contact sensor connector (8)
NOTE: If installed.
CAUTION: See Notes on installing contact sensor for brake pad wear indicator
5.1 Unscrew left rear brake pad contact sensor (810/3)
NOTE:
-
If installed.
-
Installation: Replace self-locking bolt
6.1 Remove brake pads from fixed caliper