mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF54.50-P-2013GH Compass Calibration, Function|Page 12964 > < GF54.50-P-2013GH Compass Calibration, Function|Page 12962
Page 1
background image

Compass: Description and Operation
GF54.50-P-2014GH Setting the Compass Zone, Function

GF54.50-P-2014GH Setting The Compass Zone, Function

-

with CODE (245) Trip computer

Setting the compass zone (declination)

-

Determine the compass zone (1 - 15) using the zone maps shown below.

-

Ignition: ON

-

Press the Mode button (right button, N41s2) until the compass appears on the display of the trip computer (N41).

-

Press the Reset button (left button, N41s1) to jump to the zone setting mode

-

Press the Reset button until the number of the compass zone required (1 - 15) is displayed

-

Press the Mode button twice to return to the compass display and save the displayed compass zone.

Examples

-

San Francisco:
On the zone map of North America San Francisco is located in compass zone 4.

-

Berlin:
On the zone map of Europe and Africa Berlin is located in compass zone 8.

-

Bonn:
On the zone map of Europe and Africa Bonn is located in compass zone 9.

To maintain the best possible route display, it may be necessary to change the compass zone en route. (For example, the vehicle passes through two
compass zones when driving from Bonn to Berlin (see examples).

Earth's magnetic field

The compass uses the earth's magnetic field to determine the direction in which the vehicle is facing.

The magnetic poles (north/south) of the earth, however, are slightly different to the geographical north and south poles. The magnetic axle of the earth is
tilted approximately 20 degrees compared to the earth's rotational axis. If the earth's magnetic field is to be used to determine direction, therefore, various
correction factors must be taken into account for the different zones of the earth. This is done by calculating 15 different compass zones. The declination
is approximately the same at each place within a zone. If the correct compass zone is entered, the compass can compensate for the earth's magnetic field
and therefore display the route with a relatively high degree of precision (±10 degrees).

Zone map for Europe and Africa

GF54.50-P-2013GH Compass Calibration, Function|Page 12964 > < GF54.50-P-2013GH Compass Calibration, Function|Page 12962