ML 430 (163.172) V8-4.3L (113.942) (2000)
Dome Lamp: Service and Repair
AR82.20-P-0110GH Remove/Install Front Dome Lamp
Removing And Installing Front Dome Lamp
Removal, installation
1
Remove overhead control panel (1)
2
Remove bulb (2)
3
Release socket (3) for bulb (2) by pressing it
NOTE: The bulb socket is clipped to the overhead control panel.
4
Pull dome lamp switch (4) off of reflector housing (6)
5
Unscrew screws (5) from reflector housing (6) on left and right on overhead control panel (1)
6
Pry reflector housing (6) out of overhead control panel (1)
CAUTION: Avoid damaging reflector housing
7
Reinstall in opposite order